Changsha ZMADTO Plywood Co.,Ltd

  1.  The surface of  film faced plywood  should be flat and smooth, and the dough should have no obvious wormholes, cracks, short feet, and scars, so that the appearance of the concrete after the formwork is removed can be neat and beautiful.   2.  Check whether the amount of film faced plywood glue is enough, first saw the building template into wooden strips with a width of 4CM and a length of 40CM, unscrew it by hand, and see if the raw material in the middle is wire-drawn. If the dough is separated from the dough, it means the glue  The amount is not enough, it is easy to crack during use, and it cannot be reused many times.   3.  Check whether the toughness is enough, and see how the board is flexible. Pick a template at random, one end is high and the other is low, stand on it and keep stepping on it. If the template has too obvious cracking sound, it means that the interior of the template is not complete.  core material.   ...

According to different materials, building formwork is mainly divided into several different types: film faced plywood, steel formwork, bamboo plywood, plastic formwork, aluminum alloy formwork, etc., and different types have their own characteristics.   Film faced plywood  also named wood formwork is used for horizontal formwork, shear walls, vertical siding, viaducts, overpasses, dams, tunnels and beam-column formwork etc. in high rise buildings.   The construction of cast-in-place reinforced concrete structures with steel formwork is very simple and convenient.   Bamboo plywood is suitable for horizontal formwork, shear wall, vertical wall panel, bridge, viaduct, dam, tunnel subway and beam pile formwork in housing construction, etc., and has many uses.   Plastic formwork and aluminum alloy formwork have the characteristics of light weight, high rigidity, and easy assembly, but they have not been widely used due to their high cost. 1 Today, the most popular b...

  The main reasons for the deformation of  building formwork : 1.       The subsidence of the foundation leads to the deformation of the building formwork. 2.       Deformation of the template due to long-term exposure to the sun and rain. 3.       The support spacing of the building  formwork is too large   The solution to the deformation of the building template: 1.       The template assembly should be assembled in strict accordance with the size of the template layout diagram. 2.       The distance between the supports at the bottom of the beam should be able to ensure that no deformation occurs under the action of concrete weight and construction load. If the support bottom is a soil foundation, it should be carefully compacted first, a drainage ditch should be set up, and long dunnage or profiled steel should be laid to ensure that the su...

  1.       Lasting color: Our  film faced plywood  will keep its original color and will not fade or fade.   2.       Strong corrosion resistance: Our film faced plywood is treated with high technology to be more corrosion resistant.   3.       Styling is easier: Our film faced plywood can meet different styling requirements.  Using this template for modeling can be done according to the actual needs of users.   ZMADTO Plywood Co.Ltd  is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.

  1.       Anti-fume:  film faced plywood  is easy to clean. 2.       Wear resistance: film faced plywood is durable. 3.       Anti-moisture: The surface of film faced plywood is covered with film, which reduces the direct contact with water and has strong durability. 4.       Good touch: There is a layer of film on the surface of film faced plywood, which is smooth to touch. 5.       Many colors: film faced plywood has a variety of colors to choose from. 6.       The price of film faced plywood is moderate and the price is good. ZMADTO Plywood Co.Ltd  is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of...

  1.       Hammer Use a hammer with a small round head to slam the surface of the  building formwork , and observe the concave surface of the building formwork. The building formwork of good quality has dents, but there will be no cracks.   2.       listen Pick a template at random, and people stand on it and keep stepping on it to see how flexible the board is. If the template has too obvious cracking sound, it means that the interior of the template is not a whole core material.   3.       Screw Saw the template into wooden strips with a width of 4CM and a length of 40CM, and unscrew it by hand to see if the raw material in the middle is wire-drawing.  If the dough is separated from the dough, it means that the amount of template glue is not enough.   4.       Boil Boil in water, check the adhesive force, put the sample in boiling water and cook for two hou...

The mois ture ratio of  film faced plywood  must be kept at about 12% to ensure that the storage process of the wood will not be greatly affected by the environment. The common practice is to coat the side of the wood with a layer of paint to prevent the wood from drying or from Absorb moisture from outside.   ZMADTO Plywood Co.Ltd has its own rotary cutting plant for wood raw materials, which controls the moisture content of wood from the source, the integrity of the entire core board and the thickness of various specifications. In this way, the film faced plywood produced has good toughness, contains more fibers, has high bonding strength and is durable. This is also one of the important reasons why the film faced plywood produced by ZMADTO Plywood Co.Ltd can be used more than ten times.   ZMADTO Plywood Co.Ltd  is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an ...

  1.       Water removal: first check whether there is water on the foundation, and dispose of the water on it.   2.       Firmness: Check whether the foundation is loose. If it is loose, it will also sink, and then it must be firmed.   3.       Flat lay: Check whether the foundation is inclined, and lay the  building formwork  flat.   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.

    1.       Film faced plywood : The tree species used for wooden building formwork can be selected according to the actual situation in various regions, and pine and poplar are generally used. Film faced plywood has large wood consumption and low reuse efficiency, but is convenient to use and high efficiency.   2.       Construction wood plywood: Construction wood plywood is a stereotyped building template with plywood as the panel and angle steel as the frame. The plywood is used as the panel, which overcomes the disadvantage of unequal directionality of wood, and has good mechanical performance. This building formwork has the advantages of high strength, low self-weight, no warping, no cracking, large plate width and few joints.   3.       Steel building formwork: Steel building formwork is generally made into stereotyped building formwork, which is assembled into various shapes and sizes ...

  1.       The base formwork is made of pine board, poplar board, eucalyptus board, and the thickness of the ground beam side board is 20mm.   2.       The bottom formwork of the main beam is made of pine boards, the thickness of the bottom formwork is 40mm, and the column formwork and floor formwork are made of machine-made wooden formwork (nine plywood) with a formwork thickness of 12mm.   3.       The support system is made of fir logs, the diameter of the small head is not less than 70mm, and the size of the small square wood is 400×500mm for the pulling connection, and the bottom support system is steel pipe support.   4.       The  wood formwork  and support system shall not use brittle, severely twisted and damp-deformed wood.   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established i...

There are macrocapillary and microcapillary systems in the wood tissue of the   building formwork . The water in the macrocapillary system is called free water, and the water in the microcapillary system is called sorbed water. In addition, a small amount is combined with wood molecules in a combined state of compound water.   The resistance of water movement of high-rise special building formwork, in the drying of veneer, the direction of water movement is mainly transverse conduction perpendicular to the direction of fiber arrangement, so the largest resistance is the resistance of pits, followed by the resistance of cell cavity and cell wall. The greater resistance that affects the evaporation of water, and the critical layer where the surface of the veneer is in contact with the air. When the thin layer in contact with the surface of the high-speed plate, the speed is close to zero, and it is a stagnant air film that separates the air from the surface. This film is called ...

1.       The interior of the  building formwork  should be cleaned up. The debris left in the building formwork will cause defects such as slag inclusions in the concrete. 2.       When supporting the building formwork, the requirements for the embedded parts and reserved holes should be to fix the embedded parts, reserved holes and reserved holes on the building formwork at the same time, not left behind, the size meets the requirements, and the installation is firm. 3.       The building formwork should be painted with release agent. When painting, choose an oil-based release agent that does not affect the structure and hinder the construction of decoration projects. 4.       For multi-storey cast-in-place structures, the superstructure formwork and brackets must be supported on the lower floor slab. 5.       The joints of building formwork should not ...

One way to effectively control the consumption of  film faced plywood  is to do a good job in technical disclosure. Because film faced plywood, there is no unified quality standard in the industry and product identification is confusing. Therefore, designers should communicate with technicians and material purchasers to clarify the specifications of construction templates, avoid rework due to quality specifications, and reduce Unnecessary cost loss. According to the layout plan of the formwork drawn by the design and the construction requirements of the wooden formwork, make a technical disclosure with each woodworker participating in the construction, so that they can understand the concept of construction control conveyed by the design drawings in detail, and strictly follow the examples of the design layout drawings. Cut so that each wood formwork is functional and laid in place.   The key to controlling the consumption of wood formwork is to do a good job in process c...

When we wholesale  building formwork , we should know the construction sequence of building formwork, which are cushion formwork, foundation beam formwork, structural column formwork, column formwork, wall panel formwork, ring beam formwork, beam formwork, floor formwork and stair formwork.   The foundation of the cushion formwork in the building formwork is generally not high in height, but the volume is relatively large, so before installation, the centerline of the foundation and the elevation of the foundation should be checked. The structural column formwork can be divided into two types: the external wall structural column and the internal wall structural column; for the column formwork, before installation, the two sides should be the same as the long side of the column section according to the pop-up cross line and four peripheral lines. Plate, plus two plates with the short side dimension of the column section, assembled into a combined stereotyped formwork.   We...

The safety of  building formwork  is very important. If the erection is not firm, there will be a very big safety hazard during construction. Therefore, we have to master some skills that make the built templates more secure.   1.       Before construction, design should be carried out.   2.       Use the uniform installation method of the building template to install.   3.       After the reasonable construction of the formwork is completed, and before the concrete is poured, all garbage inside the formwork, especially stone chips and wood chips, should be removed. In addition, the position of the formwork should be carefully checked to check whether the position and size of the reserved holes are accurate, and whether the formwork support is firm or not. , Whether the seams are tight. After checking all aspects, the template can be closed. ZMADTO Plywood Co.Ltd  is focus on constru...

Building template is a necessary tool in construction, but it has a certain service life, and it will face elimination after a long time of use. Everyone can take feasible measures to effectively protect the building formwork, so that the building formwork can be reused many times.   1.       First of all, we must buy  good quality building templates . The better the quality of the template, the longer its service life will be.   2.       The building template must be operated in a standardized manner during construction, and the support of the building template must be correctly erected during the construction process.   3.       The building template should also pay attention to certain maintenance and maintenance when it is not used daily. If you do not pay attention to the maintenance and maintenance, then its performance will decline very quickly, resulting in a decrease in the number of ...

  1.       The surface of the template is smooth and smooth, so that the poured wall will be smooth and smooth.   2.       It needs to have sufficient compressive capacity and strong toughness.  A good building template  must be used more than ten times, and the board must not bend when used more than ten times. After strong pressure, it will quickly restore its original shape.   3.       The surface of a good building template is tightly attached to the inner core, and the surface of a bad building template often blisters after being used for one time and encountering water. ZMADTO Plywood Co.Ltd  is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous develo...

  1.       Compared with traditional steel formwork,  film faced plywood  is very light in weight, so it is very convenient to install and dismantle when in use.   2.       The precision of film faced plywood is higher when it is used, the error is very small, and the construction is simpler.   3.       The use of film faced plywood can save production materials and save a lot of steel pipes and other materials used for reinforcement during production, and its storage is also very easy, and the reuse rate is also very high.   4.       Compared with the steel template, the price of film faced plywood is also relatively cheap, and the number of turnovers is also very large, and the cost performance is still very high, which can save the use of construction costs.   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. O...

  When buying a building template, the most concerned thing is its price, and its price gap is relatively large, so what causes the large disparity?   1.       Product quality  of building formwork: film faced plywood  of good quality is more expensive. 2.      Manufacturers : The price of film faced plywood produced by different manufacturers is also different. Some well-known enterprise manufacturers have advanced production techniques, and the quality of their products can be guaranteed. With the company’s brand awareness, natural sales are unnecessary. If you are worried, the price increase is justified. In the same way, some small companies will have some discounts or promotions for the efficiency of their products, which means that their prices will be lower. 3.       The production process  of the construction template is different: This leads to differences in the production cost inves...

  1.       In the early stage of purchase, try to buy  film faced plywood  of qualified quality. Although the investment of film faced plywood is a little higher, it reduces the phenomenon of mold expansion and also reduces the subsequent trouble caused by mold expansion.  　　   2.       Managers should carefully check whether the reinforcement methods and measures are in place after the film faced plywood is supported and before pouring. After the mold expansion occurs, the management personnel should analyze the cause with the workers, find out the omissions, and avoid the same reason for mold expansion again.   3.       The carpenter must take care of the film faced plywood during the whole process of pouring the concrete, and immediately coordinate with the laborer if the problem is found to avoid serious mold raising problems.  　　   4.       Ver...