Changsha ZMADTO Plywood Co.,Ltd

Concrete pouring has always been an important part of engineering construction, and the construction difficulty can not be ignored. Although the wide application of construction formwork can save labor costs to a large extent, the premise is that the quality and type of formwork match. Considering the increasingly mature technology of formwork products, plywood formwork with features of convenient disassembly and assembly is favored. In this way, it is wise to reduce the difficulty of concrete pouring by relying on it. The careful selection of formwork products is to avoid construction delays caused by uncertain factors in the construction process, so it is particularly necessary to pay attention to the quality of formwork.  It is important to know that plywood formwork, as a common basic building material, has many advantages such as accurate size and convenient erection. Although there are many types of  film faced plywood  products, it is still necessary to formulate ...

  Plywood is a construction wood sheet made up of thin layers of wood veneers glued together placing wood grains 90 degrees to one another.  That leads to a solid board or piece of plywood that can be used for a wide array of applications. Below are the pros and cons of Plywood:   Advantages: 1.  Plywood  features durability and high strength. It is large-scale used in engineering and civil projects because of the use of many layers of wood veneer. 2. Due to the way in which plywood is made, you can customize the thickness that you want ranging from 6mm to 32mm. 3. It is easy to cut in shapes and can be bent. Plywood is flexible and it can be bent and cut into various shapes. 4. It is relatively lightweight and inexpensive. 5. It is convenient to use any polish and paint on plywood with no worries.   Disadvantages: 1. It is not durable like wood. 2. It is hard to saw for its materials and structure. 3. Compared with wood, plywood may release volatile organi...

1. The   building plywood   must be cleaned up and the release agent should be applied evenly. The demoulding time must be carried out accordance to the notification from the technical to prevent sticking to the mold. 2. When removing the wall construction plywood, remove the diagonal brace and the diagonal rod firstly, then remove the horizontal backing. Use a crowbar to gently pry the plywood to separate the plywood from the concrete. Do not use excessive force, especially the corners and the hole , to avoid make building plywood deformed. 3. When removing the floor construction plywood, remove the horizontal tie rods firstly, then remove the vertical rods. When the beam formwork is removed, the side form is removed firstly, then remove the bottom plywood. The concrete strength must meet the requirements when the plywood is removed.

Film faced plwood  has good processing performance and is very suitable for use in precision V-groove technology with high product rate. Compared with the traditional plywood of the same outer size:   1 Film faced plwood is environmentally friendly and moisture-proof, which improves the water resistance of the product.   2 Film faced plwood has uniform color: the appearance is very uniform in color.   ZMADTO Plywood Co.Ltd  i s focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.  

    1. Product price, delivery ability, quality, and competitive technology ADTO products have advantages in price, delivery, and quality. Besides, our technology solution is customizable to satisfy customers’demands.   2. Satisfy customers ’  demands for more products ADTO is a one-stop building materials & equipment solutions provider . We cooperate with more than 1000 factories to satisfy your customers’ needs of construction project materials.   3.Competitive new products needs 200 joint ventures are expected to established every month in ADTO to meet your demands of new products.   4. You can get more distributors ADTO can provide no less than 100 regional distributors within 1 year.   5 . You will have more customer resources              ( 1 )   Resource 1: Exhibition (2) Resource 2: Share the builders, developers, and project contractors in your area with you. (3) Resource 3: Online marketing (4) Shar...

  When the solidification strength of the poured concrete column reaches 1MPa or more, the column formwork of the   cylindrical film faced plywood   can be removed.   When removing, first remove the reinforced wood square and steel pipe on the outside of the column, then remove the concrete slag under the column foot, and finally loosen the cylindrical film faced plywood to reinforce the steel belt. Generally, the cylindrical template will fall off by itself. If it does not fall off, you can carefully pry open the template interface with a crowbar, and the template can be removed successfully. The process of demolding requires two people to collaborate at the same time. Slowly remove the column formwork, and then connect the cylindrical film faced plywood into a cylinder with reinforced steel belts, remove it with a tower crane, and place it in a flat and spacious place. Finally, the cylindrical film faced plywood needs to be technically cleaned, such as using a clea...

  Today we will take a look at the instructions for the use of   cylindrical film faced plywood   reinforced steel belts. First of all, the cylindrical film faced plywood is composed of three parts: the panel, the supporting structure and the connectors. The plate is the bearing plate that directly contacts the fresh concrete. The supporting structure is a temporary structure supporting the panel, concrete and construction load, which can ensure the solid combination of the cylindrical film faced plywood structure. The connector is an accessory that connects the panel to the supporting structure. In short, the use of cylindrical film faced plywood with the reinforced steel belt can achieve the most stable. The existence of the reinforced steel belt makes the cylindrical film faced plywood more useful. Its operation is far superior to that of the traditional steel formwork. The following are methods for using the reinforced steel belt of cylindrical film faced plywood: 1. ...

During construction,  film faced plywood  has always been an major part of building materials, and film faced plywood will directly affect the quality of the entire building. Therefore, how to choose film faced plywood is a matter of significance, and it is also a skill we need to master! The selection and purchase of film faced plywood should be considered from the following aspects: 1. Product appearance: Consider wrinkles, scratches, dead knots, scars, insect bites, corrosion, etc. in terms of color, smoothness, and brightness. 2. Stitching: Put the two wood formworks together and observe whether the stitched surface is neat and whether there are protrusions. 3. Protective substances: whether protective substances are used on the building surface. 4. Sound: Knock the wood formwork with your hand and listen carefully to the sound. The high-quality wood formwork has a crisp sound. 5. Materials: There are many types of film faced plywood, and the most suitable materials should...

 Architectural wood framwork refers to a layer of film-covered paper on a high-quality artificial board. The film-laminated paper and the artificial board are thermally pressed to generate a construction-use template; the surface of the film-laminated board is lubricated, with a bright gloss, waterproof and fireproof. Durability (weatherability, corrosion resistance, chemical resistance) and anti-fouling ability, the use of film-covered board construction makes the cement mold surface more lubricated, can better mold release and prevent secondary ashing, greatly improving work Efficiency and save manpower and data. There is a problem of wasting materials when using wood formwork in building construction. So what should be done to save the use of wood framwork? 1. When using steel pipes as supports and crossbars, planning and calculating carefully. When cutting steel pipe, it must in a certain engineering modulus, and construction should be carried out according to the specific stru...