Key information of building formwork construction

When we wholesale building formwork, we should know the construction sequence of building formwork, which are cushion formwork, foundation beam formwork, structural column formwork, column formwork, wall panel formwork, ring beam formwork, beam formwork, floor formwork and stair formwork.

 

The foundation of the cushion formwork in the building formwork is generally not high in height, but the volume is relatively large, so before installation, the centerline of the foundation and the elevation of the foundation should be checked. The structural column formwork can be divided into two types: the external wall structural column and the internal wall structural column; for the column formwork, before installation, the two sides should be the same as the long side of the column section according to the pop-up cross line and four peripheral lines. Plate, plus two plates with the short side dimension of the column section, assembled into a combined stereotyped formwork.

 

We can also understand that the span of the foundation beam formwork beam in the building formwork is relatively large, but the width is generally not large.

 

In addition, when placing the building formwork, it should be noted that the board surface should not be in direct contact with the board surface, and it should not be placed directly on the ground. Use wood to separate it layer by layer to keep the template ventilated.

 

ZMADTO Plywood Co.Ltd is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.