Things to know about building templates installation

1.     The interior of the building formwork should be cleaned up. The debris left in the building formwork will cause defects such as slag inclusions in the concrete.

2.     When supporting the building formwork, the requirements for the embedded parts and reserved holes should be to fix the embedded parts, reserved holes and reserved holes on the building formwork at the same time, not left behind, the size meets the requirements, and the installation is firm.

3.     The building formwork should be painted with release agent. When painting, choose an oil-based release agent that does not affect the structure and hinder the construction of decoration projects.

4.     For multi-storey cast-in-place structures, the superstructure formwork and brackets must be supported on the lower floor slab.

5.     The joints of building formwork should not leak slurry: the leakage of building formwork will cause honeycomb pitted surface of concrete appearance, which will directly affect the quality of concrete. Therefore, no matter what kind of material is used to make the building formwork, the joints should be tight and not leaking.

 

ZMADTO Plywood Co.Ltd is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.