Changsha ZMADTO Plywood Co.,Ltd

As the base material: Industrial-grade   particle board   is suitable for veneer substrate. The particle board has a uniform plot, small thickness tolerances, and a smooth surface. It is a very good veneer substrate; Furniture: particle board can be used to make cabinets, door panels, back panels, extraction panels, and other parts. Particle board has performance and economic advantages; Countertop: The particle board is stable in size, flat, smooth, without voids, and easy to veneer. It can be used as the countertop of furniture and the core board of the countertop, which meets the furniture standards and environmental protection standards; Floor bedding board: It can be used as a floor bedding board, which is strong, sound, and impact resistant. It is installed with nails and grooves, and the surface is covered with carpets and other floor coverings; Particle board has a wide range of uses and can be used in all aspects of interior decoration. It is also widely used in indus...

 For  OSB(Oriented standard board)  manufacturers, the storage and anti-corrosion is a question, 1. Pay attention to the moisture content of the oriented standard board in producing, which can improve the performance of the product. Generally speaking, 8%-10% is the most suitable. 2. Apply chemical preservatives on the surface. But chemical preservatives contains chemical components which not good for health. So the best way is pay attention to the water content in board. 3. In the process of production and processing, do not put the oriented standard board in a place that is humid, as this will affect the quality of the board. ZMADTO Plywood Co.Ltd.  is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading ...

Building film faced plywood  is widely used in construction industry. It is made by phenolic resin and processed by hot pressing. It is not deform when in water. Here are some advantages of building film faced plywood Large format: The largest format is 2440*1220, 915*1830mm, which reduces seams number and improves the efficiency of mold support. No warping, no deformation, no cracking, water resistance, and high turnover. Light weight: It is can be used in high-rise buildings and bridge construction. Many times of use: It can be reused more than 12 times under the correct storage and use conditions. Concrete pouring: the surface of the pouring object is lubricated and beautiful, minus the secondary plastering process of the wall, it can directly decorate the surface and reduce the construction period by 30%. Corrosion resistance: does not pollute the concrete surface. Heat preservation: It is good for winter construction, and can be used as a curved flat template. Construction fun...

The udeveloped area of the   film faced plywood   is the contact area between the formwork and the concrete. The developed area of film faced plywood is 2 to 3 times of the building area. The developed area of the film faced plywood is the contact area between the formwork and the concrete, including the area of the bottom of the slab and the side formwork. The developed area of the formwork of the slab is the sum of the area of the bottom formwork and the partial side formwork; the beam formwork is installed on three sides, the bottom and the sum of the three-sided formwork; and the surface area of the concrete column and wall is the sum of the area of the four sides. After calculated the developed area of the film faced plywood, it is necessary to measure the usage of the film faced plywood according to the type of the film faced plywood and the number of turnover times.

Melamine particle board  is a man-made board that glued wood or lignocellulosic materials then heat and pressure after applying an adhesive. Mainly used in furniture manufacturing. Introduction to the advantages and disadvantages of melamine particle board. Advantages: 1. Good sound absorption and sound insulation performance, heat insulation; 2. The inside is a granular cross-scattered structure with the same direction and good lateral bearing capacity; 3. Flat surface, realistic texture, uniform bulk density, small thickness error, pollution resistance, aging resistance, beautiful appearance, and can be used for various veneers; 4.  Environmental protection. Disadvantage 1. Not good to mill; 2. It is easy to cause tooth blasting when cutting, so it require higher processing equipment; it is not suitable for on-site production; C. The quality of melamine particle board on the market is uneven, and the environmental protection of inferior melamine particle board is very poor. ...

Due to the long history of solid wood flooring, it has an absolute field in house decoration, with natural growth texture and easy processing. However, with long-term sunlight, wind and rain, temperature difference etc. in the outdoor, solid wood flooring is prone to cracking, corrosion, and large cost in subsequent maintenance, WPC decking, can fundamentally solve these problems. WPC decking  also have good fire resistance. After the material is fixed and installed, it can achieve a good fire and flame retardant effect, it is not easy to burn when encountering an open flame, and it will not produce any toxic gas. Therefore, the WPC decking is environmentally and friendly, and indoor pollution can also be avoided. From material selection to processing, all meet environmental protection requirements. Usually, the method of sheet metal processing is more flexible, and you can nail and drill at will. In addition, the surface of the material can be painted. The installation method of t...

 In the early days, mental  film faced plywood  is mainly used in the construction of large projects, such as decorating the surface of skyscraper. But now, its application field has already developed to household industry, for example, the ambry and wall decoration. Actually, the popularity of mental film faced plywood is inseparable from the following four advantages: 1、Easy to Process In recent years, the technology of processing and manufacturing industry has became mature. What followed is the diversity of processing methods. This makes the temporary retreatment of mental film faced plywood in the construction site becomes more convenient, they are no longer limited to the large area project but can be cut into other shapes and play a valuable role in small-scale construction. At the same time, the production technology of mental film faced plywood is constantly making progress. The elasticity and plasticity are also improved. In addition to fast stamping technology,...