Matters Needing Attention for Stripping the Film-coated Wood Formwork
When stripping the film-coated wood formwork , the following matters should be noted: Prohibited from throwing: When removing the film-coated wood formwork, it is strictly prohibited to throw the formwork casually to avoid damaging the surface treatment layer. After stripping the formwork, the floating slurry on the board surface should be cleaned immediately and stacked neatly. Avoid drilling: Drilling holes should be avoided as much as possible on the film-coated wood formwork. If there are reserved holes, ordinary wood planks should be used for patching. Repair materials should be prepared on site so that the damaged panel can be repaired in time. Repairing damages: For relatively minor scratches and damages on the film-coated wood formwork, putty can be used to fill and flatten, and then sealed with special repair paint. For larger damages and holes, after nailing in a wooden wedge, putty and repair paint can be used for repair. Cleaning and maintenance: After each use of the...