Changsha ZMADTO Plywood Co.,Ltd

  The film faced plywood is a kind of building formwork with a smooth and smooth surface, which is made of the northern fine birch, poplar and other boards through high temperature hot pressing.   This film faced plywood is suitable for high-rise buildings, shear walls, and overpasses.   Bridges and other construction projects. The film faced plywood  has good corrosion resistance and will not corrode the surface of the concrete. It can be processed into various shapes of formwork according to the needs of construction, and the advantages and performance of the clear water formwork in all aspects are more suitable for construction construction than ordinary building templates among.   The light weight of the film faced plywood is more suitable for high-rise buildings and bridge construction projects, and it can be used in the process of not deforming, cracking, and long service life.   ZMADTO Plywood Co.Ltd  is focus on construction plywood & ...

  Film faced plywood   is a three-layer or multi-layer plate-like material that is cut into veneer from wood segments or sliced into thin wood from wood squares, and then glued with adhesive. Generally, odd layers of veneers are used, and the fiber directions of adjacent layers of veneers are glued straight to each other. In order to improve the anisotropy of natural wood as much as possible, and make the Film faced plywood have uniform characteristics and stable shape, generally film faced plywood must follow some principles in structure, one is symmetrical, and the other is that the fibers of adjacent layers of veneer are straight.   Film faced plywood is a common building decoration material in our lives, but there are many products on the market. If we want to use qualified products, we need to distinguish the quality of the products.   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established in 1993 a...

  The choice of plywood mainly depends on its formaldehyde emission and bonding strength. If the glue strength of the plywood is not good, it will fall apart easily. When choosing, pay attention to whether the nominal thickness of the plywood is consistent with the actual thickness. Pay attention to the following points when choosing plywood:   1.       There is a difference between the front and back of plywood. When selecting, the plywood should have clear wood grain, the front surface should be smooth and clean, not rough, and smooth and non-sluggish. 2.       The plywood should not have defects such as damage, bruises, bruises, scars, etc. 3.       There is no degumming of the glued whole board. 4.       Some plywood is made by pasting two veneers with different textures together. Therefore, when choosing the plywood, the joints of the plywood should be tight and there is no...

  Concept Plywood is made by hot pressing of three or more layers of solid wood veneer or sheet glue with a thickness of about one millimeter. The common ones are three plywood, five plywood, nine plywood and twelve plywood (commonly known as three plywood, five plywood, nine plywood, Twelve centimetres).   Features The structure is strong and stable. Plywood contains a large amount of glue, so edge sealing should be done during construction to reduce pollution during the day.   Purpose Plywood is mainly used for various woodwork processes such as the bottom plate of decorative panels and the back panel of panel furniture.   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leadin...

  The construction film-covered panel is simple and convenient to operate, and has low density and light weight. It is convenient for working and handling materials. It will not cause deformation even during transportation and has good waterproof performance. So what are the drying tips for building templates?   The drying of building film-covered panels generally uses earth kiln drying technology, and the wood is dried in earth kilns, which reduces costs. Then, during the firing of the kang, some of the materials have already been roasted, but some have not yet, so a drying process is required, using steam drying. Before finishing, a second microwave drying is required to evenly evaporate the water from the inside to the outside, so that the wood will not crack, deform or damage the internal stress of the wood due to the rapid heat and cold. Architectural laminate has a mirror-like polyester overlay, so its surface is hard and smooth, strong, durable, and can be demolded with...

  Wood plywood     is a very familiar product for us, especially in the construction industry and decoration industry. Its figure is very common. However, due to improper use, the life of plywood is usually affected. Wood plywood is a lossy product. With the increase in the number of uses, the performance is continuously reduced. In particular, improper use of wood plywood will seriously increase the loss, so in order to extend the use of wood plywood Proper maintenance of wood plywood is required for the life. During maintenance, the wood plywood can be painted appropriately to increase the smooth surface of the wood plywood, which can not only increase the convenience of demolding, but also protect the surface of the wood plywood, so that scratches, etc. Easily appear on the surface of wood plywood, effectively extending the service life of wood plywood.  　　 When we use wood plywood, we should also handle the wood plywood gently, and we should also choose an approp...

  Building formwork   is a formwork and support formed by pouring concrete. According to the nature of the material, it can be divided into building formwork, building wood plywood, laminated board, multi-layer board, double-sided laminated, double-sided laminated construction template, etc. During the rainy season, how to dehumidify?   When the surface is exposed to a thin layer of air, the speed is close to zero, a stagnant air film named critical layer separates the air from the surface. The moisture can only evaporate through the air stream that slowly diffuses into the critical layer. The heat in the airflow can only slowly pass through the critical layer and be transferred to the inside of the veneer. In the drying process of building formwork, the direction of water movement is mainly the transverse conduction perpendicular to the direction of fiber arrangement, so the resistance is the pit resistance, followed by the hole resistance and the hole wall resistance. T...