Environmental Standards for MDF

According to the national standard, MDF can be divided into E0, E1 and E2 by the free formaldehyde content. E2-grade formaldehyde emission is ≤5mg/L; E1-grade formaldehyde emission is ≤1.5mg/L,


which can be used for interior decoration directly; E0-grade formaldehyde emission is ≤0.5mg/L. When consumers buy MDF, they should try to buy products with low formaldehyde emission, which are safer.


ZMADTO Plywood Co.Ltd. is professional manufacture in plywood. We supplier all kind of film faced plywood, particle board, MDF board in all kinds and size, if you have any require, welcome to call us.

评论

发表评论

此博客中的热门博文

Six Characteristics of Wooden Building Formwork

图片
  The application of   wooden building formwork   is becoming more and more widespread because of its six characteristics. 1. The board is large and the surface is flat. This feature reduces a lot of work in the building construction process. It does not require a lot of construction personnel to carry out formwork support, pouring and demoulding, thereby saving a lot of labor costs and reducing the cost of decoration of exposed concrete surfaces and grinding joints. 2. Large carrying capacity. It can well withstand the pressure of pouring construction and the lateral pressure of concrete. And the surface is coated with a layer of film to make the surface smooth and has good wear resistance, which can be reused. 3. Lightweight materials. One or two construction workers can easily move the building template without mechanical auxiliary transportation. Moreover, compared with the steel structure template, its stacking, use and management are more convenient. 4. The flexible...
阅读全文

5 Precautions for Plywood Installation

图片
 The plywood of  ZMADTO Plywood Co. Ltd  is used a lot in the construction site because it can speed up the construction progress. At the same time, in order to improve the safety of the installation, we have summarized 5 precautions for plywood installation. Hope everyone will take safety measures before installation to avoid accidents. 1. The inside of the plywood should be cleaned. In order to clear the interior of the building formwork, a cleaning port should be left. 2. When supporting plywood, the embedded parts and reserved holes should not be left, the size should meet the requirements, the installation should be firm, and if there is any deviation, it should meet the acceptance regulations. 3. The plywood should be brushed with a release agent. When brushing, choose an oily release agent that will not affect the structure and hinder the construction of the decoration project. And when brushing, it must not contaminate the steel. 4. If it is a multi-layer cast-in-...
阅读全文

Method for Using the Reinforced Steel Belt of Cylindrical Film Faced Plywood

图片
  Today we will take a look at the instructions for the use of   cylindrical film faced plywood   reinforced steel belts. First of all, the cylindrical film faced plywood is composed of three parts: the panel, the supporting structure and the connectors. The plate is the bearing plate that directly contacts the fresh concrete. The supporting structure is a temporary structure supporting the panel, concrete and construction load, which can ensure the solid combination of the cylindrical film faced plywood structure. The connector is an accessory that connects the panel to the supporting structure. In short, the use of cylindrical film faced plywood with the reinforced steel belt can achieve the most stable. The existence of the reinforced steel belt makes the cylindrical film faced plywood more useful. Its operation is far superior to that of the traditional steel formwork. The following are methods for using the reinforced steel belt of cylindrical film faced plywood: 1. ...
阅读全文