Material Requirements and Width of Wooden Formwork

 1. The base formwork is made of pine board, poplar board, eucalyptus board and the thickness of the ground beam side board is 20mm. 


2. The bottom formwork of the main beam is made of pine boards, the thickness of the bottom formwork is 40mm, and the column formwork and floor formwork are made of machine-made wooden formwork with 12mm thickness formwork.


3. The support system is made of fir logs, the diameter of the small head is not less than 70mm, and the size of the small square wood is 400×500mm for the pulling connection, and the bottom support system is steel pipe support.


4. The wood formwork and support system shall not use brittle, severely twisted and damp-deformed wood.


ZMADTO Plywood Co.Ltd. is professional manufacture in plywood. We supplier all kind of film faced plywood, particle board, MDF board in all kinds and size, if you have any require, welcome to call us.

评论

发表评论

此博客中的热门博文

Types of Furniture Board

图片
Furniture boards   is the boards used for making furniture, and it is one of the fundamental materials in furniture production. There are various types of furniture boards, including solid wood boards, particle boards, plywood, etc. Solid wood boards are made from natural wood. It has natural textures and colors, providing a good texture and high durability. Although solid wood boards cost a bit high, their beauty and quality are irreplaceable. Particle boards are made by mixing wood chips with adhesive, and their surfaces are smooth. They are relatively cheaper than other boards. The advantages of particle boards are their affordability and suitability for mass production, but they are comparatively less aesthetically pleasing. Plywood is made by bonding multiple layers of thin wood sheets together, it offering stable quality with high strength, which makes it suitable for making large furniture. Plywood is inexpensive, but it may lack in aesthetic appeal and texture compared to o...
阅读全文

5 tips for buying construction plywood

  1. Cracks: It is inevitable that the templates of the middle and low boards have cracks, but too large is not good. Some cracks are generated between the texture of the material. This kind of crack will not extend and can be used with confidence, but some cracks penetrate the texture, so you must not be careless, otherwise the service life will not be long. 2. Texture: The texture is mainly used to determine the quality of the floor. Regular textures are beautiful and generous. Do not use plywood templates with messy textures.   3. Knots: Knots, which can be divided into live cuts and dead knots. Although it is impossible to have no knots as a natural product, the reasonable distribution of live knots will make the template more beautiful.  Premium plywood  are not allowed to have defective knots.   4. Color: High-quality building templates should have natural tones, clear wood grains, and materials visible to the naked eye. If the surface color is dark, it ma...
阅读全文

How to glue film faced plywood

图片
  When making   film faced plywood ,   high-quality solid wood veneer or technical wood is generally used as the fabric, which requires cold pressing, hot pressing, sanding, and health preservation.   If you want to glue the film faced plywood, you must first remove the dust on it and keep it clean. Then it should be noted that the temperature of the glue should be controlled between 20-30 degrees Celsius. If the temperature is lower, the curing time required will increase. When applying glue, pay attention to the tools must be clean, reduce the operating time, and avoid excessive aging time. At the same time, in this process, it is also necessary to ensure that the glue is evenly applied and not missed, so as to ensure the quality of the glue.   High-quality film faced plywood can usually be used to make packing boxes. When gluing the lid of the box, it can be glued manually or mechanically. Generally, adhesive self-adhesive tape is used to glue the lid of the ...
阅读全文