Changsha ZMADTO Plywood Co.,Ltd

The surface of the   MDF   is caused by impurities during the pressing process, which not only affects the appearance, but also makes the paint film easy to peel off. Surface smoothness: It is feel smooth when touching the surface. If not that means the processing is not good. Surface flatness: The surface of the MDF should be bright and flat. If the surface is not flat when viewed from the side, it means that there is a problem with the material or coating process. Overall elasticity: A harder board must be an inferior product. ZMADTO plywood  features stable supply, good quality, fast shipment, excellent product quality, and high cycle times, and it is the designated building formwork of many large enterprises. If you have any inquiry or questions about plywood, welcome to contact us.

Wood plastic composite is a kind of high-tech and environment-friendly composite material made of wood fiber and thermoplastics such as PE, PP, PVC, or PLA. After heating and extruding, it has properties and characteristics of both wood and plastic.    Wood-plastic flooring is made of  wpc decking  materials, with the same processing characteristics as wood. It can be sawed, drilled and nailed with ordinary tools and can be used like ordinary wood. At the same time, it has the texture of wood and the water resistance and corrosion resistance of plastic, making it a kind of excellent performance and very durable outdoor waterproof and anti-corrosion building material. Physical properties: good strength, high hardness, anti-slip, wear resistance, no cracking, no moth, low water absorption, aging resistance, corrosion resistance, anti-static and ultraviolet, insulation, heat insulation, flame retardant, can resist 75℃ high temperature and -40℃ low temperature. Environmental performance: e

Product advantages of   cylindrical formwork ： Fast speed: Firstly, the cylindrical formwork accessories are simple, and the disassembly and assembly is easy and fast. Secondly, there are few disassembly steps, which greatly shorten the construction time of the column. Thirdly, two people can complete the formwork without the assistance of large-scale equipment for the material is light. Fast reinforcement: The cylindrical formwork is formed by high-quality glue and birch poplar is formed by hot pressing for a long time. The formwork is stronger and durable which turnover times can be 8-10 times. Good demoulding effect: The surface of the cylindrical formwork is covered with film, the demoulding effect is good, the surface of the cylinder is smooth and flat without bumps and waves. And there is no mortar leakage at the joints, which reduces the cost of secondary finishing in the later stage. ZMADTO plywood  features stable supply, good quality, fast shipment, excellent product quality,

The   cylindrical formwork   is made of high-quality birch and poplar, which is used strong glue as the adhesive, after a long time of high temperature and high pressure, it is formed building cylindrical formwork. The cylindrical formwork is used for the creation of cylinders between 250mm and 4000mm. Cylindrical formwork is a high-quality formwork for making concrete columns, it is widely used in roads and bridges, power foundations, ancient garden buildings, antique buildings, commercial buildings, public infrastructure (libraries, stadiums, parks), etc. ZMADTO plywood  features stable supply, good quality, fast shipment, excellent product quality, and high cycle times, and it is the designated building formwork of many large enterprises. If you have any inquiry or questions about plywood, welcome to contact us.

Density Fiberboard( MDF board ) is a man-made board made of wood fiber or other plant fiber as raw material, combining it with wax and a resin binder.  Because of its soft and impact resistance properties, density board is easy to reprocess and also a good material for making furniture.  According to different densities, it is divided into high-density boards, medium-density boards, and low-density boards. (The density of MDF is 450 kg -- 600 kg/m³, and the HDF is more than 600 kg/m³). The common specifications are 1220*2440mm and 1525*2440mm. The thickness covers: 3mm、5mm、9mm、12mm、15mm、16mm、18mm、20mm、25mm、30mm. The main advantages:  1. Density Fiberboard is easy to coat. All kinds of coatings and paints can be evenly coated on the density fiberboard, which is the preferred substrate for the paint effect.  2. Density fiberboard is a kind of beautiful decorative board. 3. All kinds of veneers, paper films, decorative panels, light metal sheets, melamine boards, and other materials can b