Changsha ZMADTO Plywood Co.,Ltd

  1.       Water removal: first check whether there is water on the foundation, and dispose of the water on it.   2.       Firmness: Check whether the foundation is loose. If it is loose, it will also sink, and then it must be firmed.   3.       Flat lay: Check whether the foundation is inclined, and lay the  building formwork  flat.   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.

It is necessary to do inspection after get the product   particle board   you purchased. As an professional wooden manufactur   ZMADTO   introduce you how to carry out inspection from the aspects of product packaging.   Product package inspection: 1. The stacking height of each plate should not exceed 0.5 meters. It is necessary to check whether the binding is firm and whether the specifications and names of each plate are clearly marked. If these packaging details are right or not. 2. Check whether there is a wooden board under plywood to protect it. As a professinal manufactur,  ZMADTO  advise you that the building formwork that reaches the quality limit, we should replace it in time since it is about project quality and construction safety.

    1.       Film faced plywood : The tree species used for wooden building formwork can be selected according to the actual situation in various regions, and pine and poplar are generally used. Film faced plywood has large wood consumption and low reuse efficiency, but is convenient to use and high efficiency.   2.       Construction wood plywood: Construction wood plywood is a stereotyped building template with plywood as the panel and angle steel as the frame. The plywood is used as the panel, which overcomes the disadvantage of unequal directionality of wood, and has good mechanical performance. This building formwork has the advantages of high strength, low self-weight, no warping, no cracking, large plate width and few joints.   3.       Steel building formwork: Steel building formwork is generally made into stereotyped building formwork, which is assembled into various shapes and sizes with connecting components, suitable for various structural forms, and is widely used in the c