Changsha ZMADTO Plywood Co.,Ltd

1.       The interior of the  building formwork  should be cleaned up. The debris left in the building formwork will cause defects such as slag inclusions in the concrete. 2.       When supporting the building formwork, the requirements for the embedded parts and reserved holes should be to fix the embedded parts, reserved holes and reserved holes on the building formwork at the same time, not left behind, the size meets the requirements, and the installation is firm. 3.       The building formwork should be painted with release agent. When painting, choose an oil-based release agent that does not affect the structure and hinder the construction of decoration projects. 4.       For multi-storey cast-in-place structures, the superstructure formwork and brackets must be supported on the lower floor slab. 5.       The joints of building formwork should not ...

The variety and quality of   particle board   in the market is a mass. In order to ensure the quality of product, it is necessary to identify them before purchasing.   ZMADTO Plywood Co.,Ltd   is professional plywood product supplier, here we will tell you how to choose particle board for your reference. 1. Quality inspection report Usually, manufacturers will provide inspection report include mechanical tests and formaldehyde values, we can check quality from reports. 2. Smelling Particle board is composed of wood chips, so it has a faint woody smell. If you smell an odor, there may be much formaldehyde released. Then pay attention on it. 3. Product information Product information includes descriptions of manufacturers, brands, specifications, raw materials, grades, etc., which is difference from test report.

1.   MDF   is very hard and dense, perfectly flat, and extremely resistant to warping. It’s also relatively inexpensive. 2. It has two super-smooth surfaces (front and back) that provide a near-perfect substrate for painting. 3. Because MDF is composed of wood byproducts, you can cut, rout and drill it using standard woodworking tools. 4. It expands and contracts less than solid wood. 5. MDF parts can be fastened together with a wide variety of nails or screws, including pocket screws. 6. MDF is an excellent substrate for wood veneer or plastic laminate. 7. It can be glued together with virtually any type of adhesive, including carpenter’s glue, construction adhesive and polyurethane glue. 8. MDF can be machined, routed and shaped to create decorative moldings and raised door panels—without annoying tear-out or splintering. 9. MDF is highly compatible with solid wood. For example, you can install an MDF raised panel in a cabinet-door frame cut from hardwood.

One way to effectively control the consumption of  film faced plywood  is to do a good job in technical disclosure. Because film faced plywood, there is no unified quality standard in the industry and product identification is confusing. Therefore, designers should communicate with technicians and material purchasers to clarify the specifications of construction templates, avoid rework due to quality specifications, and reduce Unnecessary cost loss. According to the layout plan of the formwork drawn by the design and the construction requirements of the wooden formwork, make a technical disclosure with each woodworker participating in the construction, so that they can understand the concept of construction control conveyed by the design drawings in detail, and strictly follow the examples of the design layout drawings. Cut so that each wood formwork is functional and laid in place.   The key to controlling the consumption of wood formwork is to do a good job in process c...