Changsha ZMADTO Plywood Co.,Ltd

The safety of  building formwork  is very important. If the erection is not firm, there will be a very big safety hazard during construction. Therefore, we have to master some skills that make the built templates more secure.   1.       Before construction, design should be carried out.   2.       Use the uniform installation method of the building template to install.   3.       After the reasonable construction of the formwork is completed, and before the concrete is poured, all garbage inside the formwork, especially stone chips and wood chips, should be removed. In addition, the position of the formwork should be carefully checked to check whether the position and size of the reserved holes are accurate, and whether the formwork support is firm or not. , Whether the seams are tight. After checking all aspects, the template can be closed. ZMADTO Plywood Co.Ltd  is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240

  Plywood   consists of at least 3 veneers or plies bonded together with an adhesive. Through trial and error, it has become clear that each ply should be oriented with its grain running perpendicular or 90 degrees to the adjoining layer. This has been shown to reduce the shrinkage, bowing, and improve the strength of plywood. Plywood is made out of specially-grown trees that tend to be smaller in diameter than the usual trees to get lumber from. This is not an issue, as the production process involves rotary peeling or sliced veneers resulting in long plies from logs. Rotary peeling involves a massive lathe into which logs are inserted. The lathe sheers off the plies in long sections that can then be glued together to form plywood. Another method is veneer slicing, which looks to be slightly less wasteful than rotary peeling. It involves a similar process to traditional lumber manufacture as the veneer slicing machine slices off the plies. This has been shown to be better for keeping

The plastic wood industry has been improved after years development. Because of its advantages,   wood-plastic board   can be used in engineering construction, house decoration, gardens, parks, etc. Next, let's learn about the advantages of wood-plastic board: 1. Maintenance cost saving. Wood-plastic board is not easy to be deformed, moldy, or eaten by insect, that means it is not need complicated maintenance, which saved a lots of money. 2. Dense structure. The density of wood-plastic board can reach to 1.3g/cm, which is about three times that of traditional wood. 3. Resist aging and have a long service life. Wood-plastic board also has better anti-mildew, anti-corrosion, moisture-proof and insect-proof functions than anti-corrosion wood. ZMADTO Plywood Co.Ltd.  is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory ha

Building template is a necessary tool in construction, but it has a certain service life, and it will face elimination after a long time of use. Everyone can take feasible measures to effectively protect the building formwork, so that the building formwork can be reused many times.   1.       First of all, we must buy  good quality building templates . The better the quality of the template, the longer its service life will be.   2.       The building template must be operated in a standardized manner during construction, and the support of the building template must be correctly erected during the construction process.   3.       The building template should also pay attention to certain maintenance and maintenance when it is not used daily. If you do not pay attention to the maintenance and maintenance, then its performance will decline very quickly, resulting in a decrease in the number of uses.   ZMADTO Plywood Co.Ltd  is focus on construction plywood & wood formwork product. O