Changsha ZMADTO Plywood Co.,Ltd

  If we want to understand the quality of a product, the most direct and effective way is to buy and use it. But obviously this method is not suitable for mass users, so today we will analyze its effective methods for everyone. Generally, we can look at the strength of this manufacturer, so that we can initially judge the quality of their products. After that, we will conduct a face-to-face understanding of the template and directly observe  the building template  products to prove the quality.   The general construction template has simple structure, easy installation and disassembly, flexible use, is more suitable for centralized manufacturing, saves raw materials, can improve efficiency, speed up work, has sufficient bearing capacity and stability, and can withstand various conditions during construction The various loads that appear are some of the characteristics of the building template, and when we use it, we must use it correctly according to these characteristics. Only in this

Building film faced plywood  is widely used in construction industry. It is made by phenolic resin and processed by hot pressing. It is not deform when in water. Here are some advantages of building film faced plywood Large format: The largest format is 2440*1220, 915*1830mm, which reduces seams number and improves the efficiency of mold support. No warping, no deformation, no cracking, water resistance, and high turnover. Light weight: It is can be used in high-rise buildings and bridge construction. Many times of use: It can be reused more than 12 times under the correct storage and use conditions. Concrete pouring: the surface of the pouring object is lubricated and beautiful, minus the secondary plastering process of the wall, it can directly decorate the surface and reduce the construction period by 30%. Corrosion resistance: does not pollute the concrete surface. Heat preservation: It is good for winter construction, and can be used as a curved flat template. Construction functio

Film faced plywood  has certain storage requirements, which need to be followed during use to ensure its corresponding quality of use. If film faced plywood needs to be stored for a long time, it should be oiled on the surface, stacked neatly and covered with rain cloth; during transportation and storage, it should be avoided that the film faced plywood is deformed and aging caused by sunlight.   When using film faced plywood, care should be taken to prevent the metal corners from scratching, hitting and falling off the surface, and the shape and surface integrity of the multilayer board and laminate must be ensured. When storing film faced plywood, you must pay attention to details to ensure the storage quality of film faced plywood. Only a good storage environment can guarantee the normal application of building templates in the future.   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240

The udeveloped area of the   film faced plywood   is the contact area between the formwork and the concrete. The developed area of film faced plywood is 2 to 3 times of the building area. The developed area of the film faced plywood is the contact area between the formwork and the concrete, including the area of the bottom of the slab and the side formwork. The developed area of the formwork of the slab is the sum of the area of the bottom formwork and the partial side formwork; the beam formwork is installed on three sides, the bottom and the sum of the three-sided formwork; and the surface area of the concrete column and wall is the sum of the area of the four sides. After calculated the developed area of the film faced plywood, it is necessary to measure the usage of the film faced plywood according to the type of the film faced plywood and the number of turnover times.

1 We are a manufacturer and can give buyers the greatest profit margin. 2 We are capable to meet the supply needs of buyers without pressure. 3 Our film faced plywood specifications are complete, which can meet the needs of you such as construction companies for different purposes. 4 Our  film faced plywood  quality has authoritative certification, which is safer to use and more environmentally friendly. 5 We have a professional team to ensure you worry-free use   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.

  In the daily use of   plywood  on construction sites, the deformation of the building template has always been a problem that plagued the builders. When buying a building template, in addition to paying attention to the quality of the product, you must also pay attention to protection during normal use.  1. When using plywood and its supporting system, the construction personnel must fully consider their own rated load of their own weight and the lateral pressure generated by the concrete during the pouring process to ensure that the plywood has sufficient load capacity during use and must not be overloaded.  2. Regarding the support at the bottom of the beam, first of all, the spacing should ensure that it does not deform under the weight of the concrete and the construction load. If the bottom of the support is a soil foundation, it must be compacted first, drainage ditches must be set up, and skids and steel should be laid to ensure that the support does not collapse.  3. When ass

Melamine particle board  is a man-made board that glued wood or lignocellulosic materials then heat and pressure after applying an adhesive. Mainly used in furniture manufacturing. Introduction to the advantages and disadvantages of melamine particle board. Advantages: 1. Good sound absorption and sound insulation performance, heat insulation; 2. The inside is a granular cross-scattered structure with the same direction and good lateral bearing capacity; 3. Flat surface, realistic texture, uniform bulk density, small thickness error, pollution resistance, aging resistance, beautiful appearance, and can be used for various veneers; 4.  Environmental protection. Disadvantage 1. Not good to mill; 2. It is easy to cause tooth blasting when cutting, so it require higher processing equipment; it is not suitable for on-site production; C. The quality of melamine particle board on the market is uneven, and the environmental protection of inferior melamine particle board is very poor. The forma

The formwork used to pour concrete components, just needs to meet the rigidity and flatness specified in the specification, and the surface needs to be plastered and decorated. The definition of fresh water formwork was taken from the fresh water wall. After removed the mold, the surface is very flat that not need to plaster. The requirements for the template and support level are very high. Advantages and characteristics of fresh water formwork: 1. Light weight: suitable for high-rise buildings and bridge construction. 2. Large format: The maximum format is 2440×1220mm, which reduces the number of seams and improves the efficiency of mold support. 3. No warping, no deformation, no cracking, good water resistance, high turnover times and long service life. 4. It is easy to demold, it is 1/7 of the steel mold. 5. Make fair-faced concrete: the surface of the pouring object is smooth and beautiful, which make the wall minus the secondary plastering process and can be directly veneered and

Due to the long history of solid wood flooring, it has an absolute field in house decoration, with natural growth texture and easy processing. However, with long-term sunlight, wind and rain, temperature difference etc. in the outdoor, solid wood flooring is prone to cracking, corrosion, and large cost in subsequent maintenance, WPC decking, can fundamentally solve these problems. WPC decking  also have good fire resistance. After the material is fixed and installed, it can achieve a good fire and flame retardant effect, it is not easy to burn when encountering an open flame, and it will not produce any toxic gas. Therefore, the WPC decking is environmentally and friendly, and indoor pollution can also be avoided. From material selection to processing, all meet environmental protection requirements. Usually, the method of sheet metal processing is more flexible, and you can nail and drill at will. In addition, the surface of the material can be painted. The installation method of the b