Changsha ZMADTO Plywood Co.,Ltd

1 Large board width and flat surface. This feature of wooden formwork can guarantee a lot of work in the process of building construction. Do not need too many construction personnel, you can carry out the formwork, pouring, demoulding and other construction operations. The labor cost is greatly saved, and the decoration cost of the leaking concrete surface is also reduced.   2 With strong bearing capacity, the wooden formwork can bear the construction pressure of pouring and the stress of concrete to a large extent, and the surface of the formwork has been covered with a film, which is smooth and has good wear resistance, and can be reused many times.   3 The material of  film faced plywood  is light. The construction staff can easily move the building template without machinery to assist in the handling, saving a lot of expenses in the transportation process. And in use, stacking and management, it is much more convenient than steel building templates.   4 It ...

The market's demand for building templates is affected by many factors. At present, the weather has a greater impact on building templates. It stands to reason that the temperature rise will cause the construction industry to usher in a wavelet craze, and the demand for building materials such as templates will increase. However, with the advent of the rainy season, the transportation of materials and construction are hindered, and the demand for building materials has decreased. Especially in some cities with heavy rainstorms, the construction industry feels the coldness in advance.   The market for building templates has fluctuated a bit, and market demand and market prices have changed. Customers still have to keep a calm attitude when choosing building templates. If they wait until the peak season to trade, they may have to pay more costs. Commodity prices in the off-season will drop, which is an inherent market law, and the price of building templates also conforms to the mark...

Adhesives with abundant resources and low prices are two important factor in the development of   particle board   production. Therefore, the effective use of forest resources and paper pulping waste liquid has get lots attention. Tannin formaldehyde glue and sulfite pulp waste liquid glue have been successfully used as adhesives in the production of particle board. Also inorganic adhesives made of cement and gypsum have been put into used. And the new technology of adhesive-free bonding will be take into production. They will cause big change in the particleboard industry. As for the particle board, since  the directional structure is better than the random structure in terms of mechanical properties, it can be used to replace plywood or even part of the sawn board, so it has a promising future. Particle board used for decoration will have some new technology, and it is might be form an independent emerging industrial category through the prefabrication of multiple varie...

There are a variety of formwork products in the building formwork market, each of which has its own characteristics and meets various construction requirements. To say which building template is better, it depends on how they perform in their respective areas of expertise.   Film faced plywood  uses high-quality wood as raw material, and each layer of template is bonded with industrial glue. After many high-temperature and high-pressure operations, its stability is gradually enhanced. Its arbitrarily tailorable nature is unmatched by other templates. In the process of reinforcement, the construction staff will use Angstrom reinforcement steel belt, which is very convenient for installation and disassembly. The film faced plywood can be reused many times.   Steel formwork is also a common building formwork. It appeared before the wooden template, can be customized in size, and has a firm nature. It can be seen in many large buildings. It has some regular sizes, which is a ...

Formwork is a key building material for concrete pouring projects, and the quality level also has a substantial impact on the quality trend of concrete projects. Nowadays, more and more construction projects choose   film faced plywood   as the preferred choice, which also confirms the material versus formwork objectively. The influence of quality. As a high-quality building material that has been widely used in the construction industry, film faced plywood has a relatively strong adaptability to the construction environment. Of course, the relationship between this and the excellent performance of support is irreplaceable.  The selection of the building template that meets the requirements based on the specific engineering environment is naturally to ensure that the quality of the concrete project will not decline. After all, this is crucial to the safety of the entire project. In this case, the support of the film faced plywood is judged based on the material of the tem...

1. The surface of the painting   building template   is bright with good finish, which able to form enamel to fix the surface defects of the building template. 2. The thermal decomposition temperature of the painting building temmplate is about 350℃, which has good heat resistance and alkalinity that makes it good for the use environment of the building template. 3. Most of the building templates in construction projects are stocked in the open, and it is important to protect the wooden building templates from corrosion. The template paint has excellent anti-corrosion and anti-rust properties. Due to the isolation effect of the paint film, the building template can be protected from the abrasion of concrete sand and gravel and the corrosion of cement hydrate, which can effectively increase the reuse rate of the building template and extending the building template service life.

1. From the appearance point of view, checking the size and shape of the wood pellets at the center of the cross section. The length of wood pellets is generally 5-10MM. If it is too long the structure of   particle board   is not stable, and the poor deformation resistance and static bending strength if too short.  2. The moisture resistance of wood-based panels depends on density and moisture-proof agent. Moisture-proof is moisture-proof, not waterproof, so it must be distinguished during use. The moisture content of boards in northern China, including North China, Northwest, and Northeast China, should be controlled within 8-10%, and boards in the southern region, including coastal areas, should be controlled between 9-14%, otherwise the sheet will be easily deformed due to moisture absorption. 3. From the perspective of surface flatness and smoothness, particle board must be polished with about 200# sandpaper before leaving the factory. Generally speaking, it is bette...