Changsha ZMADTO Plywood Co.,Ltd

As the base material: Industrial-grade   particle board   is suitable for veneer substrate. The particle board has a uniform plot, small thickness tolerances, and a smooth surface. It is a very good veneer substrate; Furniture: particle board can be used to make cabinets, door panels, back panels, extraction panels, and other parts. Particle board has performance and economic advantages; Countertop: The particle board is stable in size, flat, smooth, without voids, and easy to veneer. It can be used as the countertop of furniture and the core board of the countertop, which meets the furniture standards and environmental protection standards; Floor bedding board: It can be used as a floor bedding board, which is strong, sound, and impact resistant. It is installed with nails and grooves, and the surface is covered with carpets and other floor coverings; Particle board has a wide range of uses and can be used in all aspects of interior decoration. It is also widely used in indus...

1. When  building templates   are stacked in the construction site, cutting and open flame welding operations are not allowed. If cutting and welding are necessary, reliable fire fighting measures should be taken.  2. When the concrete is poured, a dedicated person should be set up to take care of the building formwork. If the sub-formwork is inclined, displaced, locally run, and bulged, tightening measures should be taken in time before construction can continue.  3. When assembling and disassembling the pre-assembled large formwork, two lifting points should be used for vertical lifting, and four lifting points should be used for horizontal lifting. When installing, correct and install connectors at the same time. It can be unhooked only after the connection is firm. When lifting scattered formwork, the formwork should be placed in the hanging cage to prevent falling and hurting people.  4. When disassembling the mold, it should be disassembled one by one, and...

  High-density fibreboard  furniture is made of high-density board, which can also be called plate furniture. Compared with solid wood furniture, high-density fibreboard is easier to decorate and process, so if you pursue the appearance of furniture, high-density fibreboard is a good choice. So why the high-density board furniture good? Below we will introduce you the advantages of high-density fibreboard. 1. High-density fibreboard is a very convenient board for decoration. Therefore, high-density fibreboard furniture can be painted in various colors to meet the needs of consumers. 2. The surface of high-density fibreboard furniture is glued with veneer, adhesive film. So that the high-density fibreboard furniture has very good decorative properties, which can meet the decoration needs of different styles. 3. High-density fibreboard is a very convenient board for decoration which makes it little cost and popular for furniture desinger. ZMADTO Plywood Co.Ltd.  is focus on...

In the field of building construction, a large number of   building templates   have been used to realize various design styles, especially to achieve leapfrog construction projects. Templates play a very important role as basic building materials. Among them, model products using new materials and new technologies are popular in the actual application field, and have more advantages in specific functions, which are conducive to the improvement of the level of architectural design.   Plywood is a wooden formwork processed with new technology. It has more functional characteristics and determines the field of adaptation and good characteristics. The basic material of plywood is wood, and its light weight characteristics are very obvious. In the wide application of high-rise buildings and bridge construction, its advantages determine its more effective function. It is an ideal large-scale high-quality building and light-weight material suitable for construction. The field i...

The shopping guide would tell which kind of used in furniture when we purchasing furniture. We can not adjust its quality from the surface even what we can see  is the final product. But we can ask for a section plane of board to know more details. Here we will tell you how to know the internal structure of  particle board  and how to quality it. 1. The color of the high-quality particle board is very clean without impurities. That is means there is no excessive use of impurities, impurities in the productionof the board. 2. From the cut section, we can know that the raw materials used in the board are all large log particles, not shredded wood. This is fiber structure of the log, which makes the structure is much stable and firmer. 3. We can smell it. The superior quality particle board has a very fragrant log smell without a lacquer smell or a dazzling feeling.

There are two main types of   template  classification, one is different materials, relatively simple, common pine boards, poplar boards, etc. The other type is classified by functional purpose, such as support templates, basic templates, and column templates.   When there are similar requirements in the construction process, it is necessary to fully compare which type of template to choose on the basis of comprehensive retrieval of information to ensure that it meets the application needs of construction. The beam bottom formwork generally requires the choice of pine planks. Like the bottom formwork, the thickness is at least about 40mm. This is a standard that must be met for load-bearing and rigidity standards. However, in the construction of beams in many buildings, in order to ensure quality, special-purpose template.   Column frames and floor templates mostly choose wood-plastic frames, especially those that are mass-produced by mechanism. The thickness of 12mm...

Why is the rental price of  building formwork  sometimes very low and sometimes very high?   The first is the demand for building templates on construction sites. Simply put, if there are more construction sites in an area, the demand for building templates will increase, and the price of building templates will naturally increase. On the contrary, if the demand for building templates is small, the price of building templates is relatively stable.   Secondly, the price of formwork materials has risen. Recycling is now advocated and trees are cut reasonably. Therefore, the price of wood has always been high, which has directly led to the increase in the price of building formwork. The price of some building templates indirectly affects the rise of regional housing prices. If the housing prices continue to rise, the price of building templates will also indirectly increase. When the regional housing prices are in a stable state, the price of building templates will als...

  Light weight, high plasticity, simple operation, easy cuting and forming, and easy on-site construction.  Long-term use will not be deformed, will not break, have good waterproof and water resistance performance, fire and flame retardant, to avoid safety accidents. A good plywood can be used more than 35 times. plywood achieves high cost performance. Wear-resistant, sturdy, there are 39 levels of control in engineering production, and the products can meet various safety production needs as much as possible. It is easy to demold, and it can be demolded simply without using a mold release agent. High peelability, can save time and labor. 6. Corrosion resistant, easy to maintain, easy to operate, and can process templates of various shapes.   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besid...

Plywood  is an important part of civil construction, which affects the rotation of the structure during construction, and is a reusable support. The quality of the concrete determines whether the concrete can be formed, the support strength, the earthquake index that can withstand, the construction quality and efficiency. 1 The storage place of the plywood should be paid attention to during construction. After the plywood arrives at the construction site, it is necessary to understand its storage environment. When storing, spread the upper side, and lay it under the board for overhead treatment, so as to avoid being wetted by water and peeling, reducing deformation and lifting the feet before construction. The construction is safe. In order to meet the construction requirements, it must be carried out in accordance with the construction drawings. Do not change the structure and load, and do not change the construction drawings.   1 In addition, there are construction drawings ...