Changsha ZMADTO Plywood Co.,Ltd

Film faced plwood  has good processing performance and is very suitable for use in precision V-groove technology with high product rate. Compared with the traditional plywood of the same outer size:   1 Film faced plwood is environmentally friendly and moisture-proof, which improves the water resistance of the product.   2 Film faced plwood has uniform color: the appearance is very uniform in color.   ZMADTO Plywood Co.Ltd  i s focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.  

The products of high-quality   film faced plywood   manufacturers are made of laminated veneers layer by layer. The veneers need to be dried after gluing to eliminate the large amount of moisture brought into the core board due to the gluing. Some dry Knowledge of skills and methods is still necessary.   In the production of film faced plywood, the main purpose of drying the veneer after coating is to reduce the content of volatiles and prevent defects such as penetration, bubbling and opening of the slab during hot pressing. The veneer coated with glue in the production of packaging boards is generally No drying. When drying, the initial moisture content of the veneer, the amount of glue applied, the type of adhesive, the temperature of the medium in the drying equipment, the wind speed and the relative humidity are the conditions that determine the drying process. Among them, temperature is the main condition, generally 70 to 80 degrees, not more than 90 degrees. This is a production

  The production and use of  film faced plywood  is very important, especially in terms of storage. You must make full use of it when you use it. Let's take a look at its storage method.   The first is reflected in the design, with the lightest design as the standard. In this direction, the products produced have a certain degree of safety, whether in use or during transportation, they have such characteristics.   Then it needs to be placed in a dry environment. Because it is a wooden product, the wet soul crystal is easy to get wet, which affects our normal use, so we must make full use of it when using it.   Finally, we must pay attention to avoid direct sunlight, so as not to affect the service life. ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. A

Plywood   is a veneer that is peeled from wood segments. After superimposing, drying, gluing and other processes, the blanks are assembled in a way that the grain directions of adjacent veneers are perpendicular to each other, and then hot pressed. Today we will learn about this product The quality judgment method. There are many ways to judge its quality.   First of all, you can check the flatness of the panel. From this you can see the inner material of the board, touch it with your hands and feel for any unevenness. If so, it means that the surface is sanded. It is not good, or the material of the core board is not good, and the material is relatively broken.   Secondly, it depends on whether the layers of the plywood are distinct. The thicker the board, the easier it is to see. If each layer is made of monolithic materials, the layers will be very distinct and there will be no cross-layer phenomenon, and if the materials are not used Well, there are a lot of scraps. Due to the pres