Changsha ZMADTO Plywood Co.,Ltd

  Plywood construction will encounter all kinds of weather. Because of the bad weather in the rainy season, we need to do some preparatory work to defend. We have summed up 5 plywood preparations that should be done before construction in the rainy season. 1. Check the weather in advance during the rainy season. In rainy weather, preparations should be made in advance, and construction should be stopped if the rainfall is heavy. 2. Drainage measures should be taken on construction sites during the rainy season. Avoid the trouble that the rainwater cannot be drained out of the construction site. 3. Rain sheds should be built on construction sites in rainy season. Keep the building materials from being damaged by the rain and the sun. 4. the rainy season will have a great impact on the supply of floor materials. If necessary, rent a material yard according to the weather forecast to prepare enough materials for construction in the rainy season, so as not to affect the construction du...

  Concept Plywood is made by hot pressing of three or more layers of solid wood veneer or sheet glue with a thickness of about one millimeter. The common ones are three plywood, five plywood, nine plywood and twelve plywood (commonly known as three plywood, five plywood, nine plywood, Twelve centimetres).   Features The structure is strong and stable. Plywood contains a large amount of glue, so edge sealing should be done during construction to reduce pollution during the day.   Purpose Plywood is mainly used for various woodwork processes such as the bottom plate of decorative panels and the back panel of panel furniture.   ZMADTO Plywood Co.Ltd   is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leadin...

 The plywood of  ZMADTO Plywood Co. Ltd  is used a lot in the construction site because it can speed up the construction progress. At the same time, in order to improve the safety of the installation, we have summarized 5 precautions for plywood installation. Hope everyone will take safety measures before installation to avoid accidents. 1. The inside of the plywood should be cleaned. In order to clear the interior of the building formwork, a cleaning port should be left. 2. When supporting plywood, the embedded parts and reserved holes should not be left, the size should meet the requirements, the installation should be firm, and if there is any deviation, it should meet the acceptance regulations. 3. The plywood should be brushed with a release agent. When brushing, choose an oily release agent that will not affect the structure and hinder the construction of the decoration project. And when brushing, it must not contaminate the steel. 4. If it is a multi-layer cast-in-...

1. The texture and color of plywood The texture of plywood is regular, beautiful and generous, with natural tones and clear wood grain. Conversely, poor-quality plywood has messy textures and deep colors. 2. Amount of glue for plywood Saw the plywood into wooden strips, pull it open by hand, and see if the raw material in the middle of the product is in the shape of a wire. If the dough is separated from the dough, it means that the amount of plywood glue is insufficient. It is easy to crack during use, which will greatly reduce the use of plywood. 3. Toughness Lean one end of the plywood against a fixed pier, make one end of the plywood high and the other low, and people stand on it and step on it. If the plywood breaks too much, it means that the inside of the plywood is not a whole core material. 4. Faults and hollow cores Saw the plywood and look at the layout in the middle of the plywood. If there is a fault or hollow core, the plywood will bulge and crack. 5. Flatness of plywood ...

  The application of   wooden building formwork   is becoming more and more widespread because of its six characteristics. 1. The board is large and the surface is flat. This feature reduces a lot of work in the building construction process. It does not require a lot of construction personnel to carry out formwork support, pouring and demoulding, thereby saving a lot of labor costs and reducing the cost of decoration of exposed concrete surfaces and grinding joints. 2. Large carrying capacity. It can well withstand the pressure of pouring construction and the lateral pressure of concrete. And the surface is coated with a layer of film to make the surface smooth and has good wear resistance, which can be reused. 3. Lightweight materials. One or two construction workers can easily move the building template without mechanical auxiliary transportation. Moreover, compared with the steel structure template, its stacking, use and management are more convenient. 4. The flexible...

  When the solidification strength of the poured concrete column reaches 1MPa or more, the column formwork of the   cylindrical film faced plywood   can be removed.   When removing, first remove the reinforced wood square and steel pipe on the outside of the column, then remove the concrete slag under the column foot, and finally loosen the cylindrical film faced plywood to reinforce the steel belt. Generally, the cylindrical template will fall off by itself. If it does not fall off, you can carefully pry open the template interface with a crowbar, and the template can be removed successfully. The process of demolding requires two people to collaborate at the same time. Slowly remove the column formwork, and then connect the cylindrical film faced plywood into a cylinder with reinforced steel belts, remove it with a tower crane, and place it in a flat and spacious place. Finally, the cylindrical film faced plywood needs to be technically cleaned, such as using a clea...